This is my setup on the Wifi modem.
Now FoReM ST has requirements for the modem.dat file. There are also some settings to setup in the Forem.opt - my version.. shown as 2.3 says I can set the speed to HST.. that is the only way it works for me with the UDS-10. and it shows the user connect at 300baud, though it is much faster.
Modem.dat says it wants S0=1 (autoanswer) and V(verbose)0 off and I think in the manual it says E=0 as well because you dont want the commands to echo on the sysop screen. Not sure that E makes a difference.. it has not in my attempt to get it working.
Where I am at now.. . AMIS says he has had this working with a BONE STOCK install.. SO I am thinking.. go back to the version I downloaded from AMIS - 2.2 its shown as.. and install that.. get it working.
THen see if I can move my files over from the 2.3 to the 2.2.. and it would work???4
James
Happy DAYS!! after posting on the cbmstuff forum, I know now that the AT&D has been implemented in the current version of the firmware. This means that I will be able to run ForeSight. I will setup a 2nd a address and run it on the other modem with a 2nd machine for now. I will post. WOuld love people to log on and check it out .. see if you can find issues etc..