I HAVE been on nitelite and foremxep more often.. lol :)

was this specifically for the ST Nite Lite? or could it be used with the 8-bit version? I see in that post that Darklord put up that there was source available for the ST version at one point? or do we know if Paul Swanson ever did an ST version past the one in the download? Might be worth playing with. Have you tried playing with the ST version yet Southernamis?

There was a post on my bbs of a fellow that ran just a day ago his original cart on his incognito 800 no issues. The docs I am reading are for the original, where they ever revised?

I have written in the posts I have tried spartados, mydos, dos2.0,dos2.5 - but it never accesses a drive no activity light comes on - in ape there is no activity on the

Hey all, yes still trying or wanting to get this to run on my 800 and I am frustrated as it seems to be the only machine I cannot get this to run on. So quickly - Is the cart we have now, just a new production run of the old ROMs in a new cart design... but same in all other respects? I am asking because this is from the manual "requires 48K and a hayes compatible modem" later it also says. System Requirements You'll need the following equipment in order to use the Express! terminal cartridge: o Atari 800, 800XL, 130XE or XE game system with keyboard There does not seem to be a reason the original cart would not have worked. It also says 2) The Express! cartridge will run without a disk drive or without DOS being loaded in the computer. It is possible to run Express! on an XE game machine without disk drives, making it a very inexpensive communications setup Yet mine locks up saying its trying to load the configuration file. That computer is running any other cartridge I can throw at it. Sparta with an internal HD, IO to real drives, SIO to a PC, or to my S-Drive Max and runs FN bobterm no issues. SO has there been real changes to the original CART!?

Hmmm.. ok, I guess I am just not getting it. I am trying it tonight in the 800 nakid.. with the UDS-10. I did connect using ICE-T , but that really messed up the computer and I had to reboot. I am stuck on the loading config file thing again with Xpress - using a SD-max for the floppy

Thanks so much AMIS, I was not trying to say that anything you did was incorrect or not very generous in doing.. I am just saying I am not savy enough it would seem to get it fit and work. Has anyone got this to fit - in the case in an 800?? I can get it in without the case. I would like to use this in my 1088xel as well.. which I guess also does not NEED the case.. but an 800xl the door would short something I am sure.

How about sharing how you were able to get the supplied case working? or for that matter anyone? Since I seem to be the only one complaining that I cannot make it work, maybe there is some flash or something I need to Trim.

well I know its a uds thing.. because I have had it in the past, cant remember how I got rid of it.. not sure I did.. think if the bbs used TELNET, I was fine, if it was RAW . I got the double characters. Anyone still running a bbs on TELNET mode? Also I know its UDS, because if I use Wimodem or Modem Driver from APE.. I dont get the issue.

OK, so getting it into the slot is def, the case. I took apart my R-Time 8 and put it in there after reading its the same pcb.. and it goes in the slot perfect, so something with the current printed one I have does not work, but not sure what to take a knife to..etc.. As for getting it working. I was able with an 850 an a UDS10 get it to work, using the APE for d1: and a dos 2.5 disk. - If I attempt to use the FN it screws up the disk access - which is why I was stuck.. seems to be preventing access after a point.. aka it will load the dos 2.5 then sees the 850 R: handler, but when it goes back to D1: for the dialing directory.. locks. BTW - I know the double characters on screens has to do with TELNET mode vs RAW.. did we solve this on the UDS-10.. or am I out of luck using this? Long night.. shutting it down now.

did that. it was not down all the way on one side.. pulled it right out and re-seated. Same result. The machines work perfectly - If I boot the 800 with Fujinet installed in the machine.. cable to the APE sio2pc - APE software serving a 2.5 dos disk.. Boots just fine if I remove the Cartridge. Cartridge in, I cannot get it past the loading config file screen.

do it with a 2.5dos disk in APE.. boot to the same screen locked trying to find a configuration file.

So made a R/W Atr in FN.. formated it in Sparta 4.49e built into incognito.. rebooted .. cant even see the cart when booting in Sparta

Ok it's a 800 incognito.. I can have PBI on with Sparta or just Sparta or put some do's are on the Fuji d1: or APE or physical drive.. I have done them all with Sparta no Atari or mydos etc..

Maybe I'm not the smartest or missed this in a thread somewhere.. but I can't get get it past this

Think this is an old ver new cartridge thing again.. ce la vie.

Is everyone getting it working fine in the case on their machines? On almost all my machines I have to remove the case to get it in the slot. I assume the balance fore/aft is not correct. Just wondered if its my case? or the case STL is not correct?

Thats why I had such a hard time finding the thread again.. it was a personal msg group.. jezzzz never thought to look back in my msgs. Do I want the controller.atr?

AHHHH .. ok.. my 800 has an incognito.. so thats why that works. GOOD to know! :) at least I dont have to worry about using the SALT cart on my 400 :)

Where can I get the docs? so STOCK meaning memory.. My 400 has Axlon 48k mem upgrade. but fine.